Static Seals

Bonded seals are made up of a metal case and a rubber sealing pad. They are generally used as seal components for screw connections and flange joints. Machines tend to vibrate which can easily lead to wear and even the eventual failure of all of the rigid parts, such as the metal in nuts and bolts. Bonded seals prevent such wear by protecting parts from each other such as protecting the nut from the bolt. NAK’s bonded seals keep a reliable seal even in conditions of heavy vibrations and can be used in all kinds of application settings.  

Product Description The O Ring is a round seal with a round cross-sectional shape and good elasticity. It can be used to provide a static or dynamic seal. Because of its small size, it can fit well in small installation spaces. The O Ring can be used in a very wide range of applications. The O Ring has multiple uses, and can provide a static, dynamic, single-acting and double-acting seal. The O Ring has speed and pressure limitations and is therefore recommended for use under medium pressure conditions. According to O Ring standard AS568, JIS B2401. Measurements: Outside Diameter (OD) = Inside Diameter + (2 x Cross Section). Material NBR,HNBR,FKM

Product Description The X ring, also known as a Quad Ring, has an X-shaped cross-section. This seal can be used for a variety of functions. It has lower friction characteristics than a traditional O Ring. It can function as both a static or dynamic seal, and is typically used in hydraulic and pneumatic equipment. Material NBR,HNBR

Product Description The square seals (also called a washer or square cut seal) has a square cross-sectional shape. The square seal provides a static seal and is usually used on flanges and end-caps. This seal shape and design make it less likely to slide or roll under the pressures of two-way sliding in a hydraulic cylinder. Material EPDM