UIB3 Rod Seals

Product Description The UIP Rod Seal is a one-way, U-shaped rod seal with an asymmetrical design that keeps dirt out to protect the rod. The inner diameter of the seal has a shortened lip which increases the cross-sectional area. This seal is both an excellent dynamic as well as static seal. It can withstand pressures of up to 40Mpa.　 Material Polyurethane Product Advantages According to ISO 5597 Good media resistance Excellent wear resistance Wide operating temperature range Very good static and dynamic tightness Application Earth-moving machinery, agricultural equipment, injection molding machines, fork-lifts, loading platforms and standard cylinders. Operating Conditions Media Mineral oils Pressure ≦40 Mpa Speed ≦0.5 m/s Temperature Range -40°C , +100°C Gap Dimension 140 Bar 210 Bar 350 Bar 0.27 mm 0.16 mm 0.06 mm Surface Roughness   Sliding Surface Groove Base Groove Flanks Ra 0.2~0.4 µm ≦0.8 µm ≦3.2 µm Rz 0.8~1.6 µm ≦3.2 µm ≦12.5 µm

Product Description The UIP2 Rod Seal is a one-way, U-shaped rod seal with an asymmetrical design that not only has the shortened lip on its inner diameter similar to the UIP, but also comes with an additional sealing lip on its outer diameter. The second sealing lip provides additional protection, keeping dust and other contaminants from entering the front sealing lip. This helps to protect the mechanism, and prolongs the service life of the cylinder. The UIP2 Rod Seal is mostly used in construction and earth-moving machinery. Material Polyurethane Product Advantages According to ISO 5597 Good media resistance Excellent wear resistance Wide operating temperature range Very good static and dynamic tightness Secondary sealing lip provides additional protection against the ingress of dirt particles Application Earth-moving machinery, construction machinery, agricultural equipment, injection molding machines, fork-lifts, loading platforms and standard cylinders. Operating Conditions Media Mineral oils Pressure ≦40 Mpa Speed ≦0.5 m/s Temperature Range -40°C , +100°C Gap Dimension 140 Bar 210 Bar 350 Bar 0.25 mm 0.15 mm 0.08 mm Surface Roughness   Sliding Surface Groove Base Groove Flanks Ra 0.2~0.4 µm ≦0.8 µm ≦3.2 µm Rz 0.8~1.6 µm ≦3.2 µm ≦12.5 µm

Product Description The UNP2 Rod Seal is a one-way, U-shaped rod seal has two symmetrical sealing lips. They are designed to fit the small grooves within hydraulic cylinders of limited space. The second sealing lip provides additional protection, keeping dust and other contaminants from entering the front sealing lip. This helps to protect the mechanism, and prolongs the service life of the cylinder. The UNP2 Rod Seal performs well in lower pressure settings. This kind of seal is perfect for fork-lifts, injection molding machines, agricultural equipment, and so on. Material Polyurethane Product Advantages According to ISO 5597 Good media resistance Excellent wear resistance Wide operating temperature range Very good static and dynamic tightness Secondary sealing lip provides additional protection against the ingress of dirt particles Fit small grooves heights Good sealing performance even at lower pressures Application Construction machinery, agricultural equipment, injection molding machines, fork-lifts, loading platforms and standard cylinders. Operating Conditions Media Mineral oils Pressure ≦40 Mpa Speed ≦0.5 m/s Temperature Range -40°C , +100°C Gap Dimension 140 Bar 210 Bar 350 Bar 0.25 mm 0.15 mm 0.08 mm Surface Roughness   Sliding Surface Groove Base Groove Flanks Ra 0.2~0.4 µm ≦0.8 µm ≦3.2 µm Rz 0.8~1.6 µm ≦3.2 µm ≦12.5 µm

Product Description The HRO Rod Seal has two parts. It is designed as a two-way seal for the rod. It is a PTFE seal and an O ring combined together. PTFE is a very low-friction material, and combining it with the O Ring can be used for a wide range of operations. The HRO Rod Seal works great for the high-speed sliding of hydraulic cylinders. Material O Ring – NBR, FKM Friction Ring – PTFE Product Advantages According to ISO 5597 Good media resistance Low frictional resistance Wide operating temperature range depending on the O-Ring material Very good static and dynamic tightness High-speed sliding Application Agricultural equipment, injection molding machines, fork-lifts and loading platforms Operating Conditions Media Mineral oils Mineral oils Material NBR FKM Pressure ≦35 Mpa ≦35 Mpa Speed ≦1.5 m/s ≦1.5 m/s Temperature Range -40°C , +100°C -25°C , +200°C Gap Dimension 200 Bar 250 Bar 350 Bar 0.6 mm 0.42 mm 0.25 mm Surface Roughness   Sliding Surface Groove Base Groove Flanks Ra 0.2~0.4 µm ≦1.6 µm ≦3.2 µm Rz 0.8~1.6 µm ≦6.3 µm ≦12.5 µm